If your air conditioning unit isn’t working as intended, you might want to consider air conditioning repair. But before that, you could also perform some troubleshooting steps that could solve the problem right away.
There are a number of things that you could do. These normally involve doing certain steps that don’t require in-depth technical knowledge. This means you don’t have to worry about damaging your air conditioning unit.
Steps to take before considering air conditioning repair
Check your thermostat and make sure that it is set to a temperature that’s lower than the current room temperature. This is the first thing that you should do and the thermostat must be set to “cool” to ensure that it is indeed set to cooling state. Also, be sure that your thermostat has fresh batteries if not hard wired to your electrical system.
The next thing on the list is checking the power. Switch the air conditioning unit on and set the fan from “auto” to “on”. In case the fan doesn’t turn on, the control must have been damaged or there may have been a power issue. If the blower is working as intended, it indicates power. On the other hand, if the blower or compressor does not turn on, you might want to call a professional for air conditioning service.
During your initial check, check the condenser to see if it is working. Turn the fan to auto and set the switch to cool. Afterward, turn the thermostat to a temperature that is lower than the actual room temperature. Check the circuit breaker panel if in case the fan works but the condenser doesn’t.
To dig a little deeper, there is a button located near the refrigerant lines that will allow you to check if things are working correctly. Press the button firmly and hold it for a couple of seconds. If there is still no cooling, move on to the larger pipes of the condenser. If it is warm, it indicates a problem with the compressor of the HVAC system.
Either the compressor is turned down or it is not working at all. If the copper line is cool, it also suggests some other problems that may include airflow issues that normally suggest clogged filters. When the Freon charge in the pipes drops, it could lead to freezing. If this occurs, shut the system down and let the ice melt and let the condensed water drip. After doing so, turn the system back on and see if the freezing occurs. If it still does, it is time to call in a professional that offers air conditioning repair in Florence SC to have it fixed.
Call Florence HVAC Experts now to inquire about their air conditioner maintenance services.
Florence HVAC Experts
Florence, SC 29501